Midi In/Out Test; Host Select Test - Yamaha QY100 Service Manual

Display of Result
OK
06:Panel Switch
NG
06: Panel Switch
Push [AMP]
Test End
When testing up to [E4] is completed, OK will appear on
the display unit and testing will end. For what to be done
when an NG judgment is made during testing, refer to B.
HOW TO PROCEED TESTING.

7. MIDI IN/OUT TEST

Initial Display
QY100 TEST MANUAL
MAIN ROM Ver=#.##
SUB CPU Ver=#.##
07:MIDI IN/OUT
[ENTER]:Test Start
[-1,+1]:INC,DEC
[F4]:Exit
Test Content
This test checks operation of MIDI IN/OUT according to
the test pattern (AA EF 00 55). Note that this test can be
executed only in the MANUAL Mode or AUTO mode.
Test Procedure
Execute the test after connecting IN and OUT terminals
with a MIDI cable.
Check Item
Check to make sure that OK result is obtained in IN and
OUT operation checks.
Display of Result
AUTO mode
OK
07:MIDI (IN/OUT)
NG
07:MIDI (IN/OUT)
Push [AMP]
OK
NG
OK
NG
When an unexpected data is received:
NG
07:MIDI (IN/OUT)
TIMEOUT
When a data is not received within a certain time
Test End
Testing ends after the result is displayed and output. For
what to be done when an NG judgment is made during
testing, refer to B. HOW TO PROCEED TESTING.
8.

HOST SELECT TEST

Initial Display
QY100 TEST MANUAL
MAIN ROM Ver=#.##
SUB CPU Ver=#.##
08:HOST SELECT
[ENTER]:Test Start
[-1,+1]:INC,DEC
[F4]:Exit
Test Procedure
Execute the test after connecting MIDI IN terminal and MIDI
OUT terminal with a MIDI cable.
LCD Display
08:HOST SELECT
Select Mac
Switch the "HOST SELECT" switch to "Mac".
LCD Display
08:HOST SELECT
Select PC_1
Switch the "HOST SELECT" switch to "PC_1".
LCD Display
08:HOST SELECT
Select PC_2
Switch the "HOST SELECT" switch to "PC_2".
LCD Display
08:HOST SELECT
Select MIDI
Switch the "HOST SELECT" switch to "MIDI".
QY100
25