Secret View Setting; Live Camera View Setting - Panasonic WJ-HD500A Operating Instructions Manual

Digital disk recorder
Hide thumbs Also See for WJ-HD500A:
Table of Contents

Advertisement

Secret View Setting

When the video input is displayed in the spot mode on the
Spot Monitor, the Multiscreen Monitor is enabled to skip the
step in sequence or display a blackout in multiscreen for
that selected input image.
This function is called Secret View and the item lets you
enable or disable this function on the Multiscreen Monitor.
1. Move the cursor to the SECRET VIEW parameter in the
MULTIPLEXER SETUP menu by pressing the D or C
button.
2. Select either OFF or ON by pressing the + or - but-
ton.
OFF: Disables the secret view function.
ON: Enables the secret view function.
The factory default setting is OFF.
62

Live Camera View Setting

The live images of the unwanted cameras can be set up not
to be displayed on the spot and multiscreen monitors.
Notes:
• The image transmission through the network board
includes the camera's that is assigned not to be dis-
played on the monitors regardless of this setting.
• CAM1 is always fixed to ON, and not selectable.
1. In the 5 MULTIPLEXER SETUP menu, move the cursor
to the REC CAMERA SETUP, and then press the SET
button.
The REC CAMERA SETUP appears.
5-2 LIVE-CAMERA VIEW
CAM VIEW
CAM VIEW
1
ON
9
2
ON
10
3
ON
11
4
ON
12
5
ON
13
6
ON
14
7
ON
15
8
ON
16
2. Move the cursor to the desired camera, then select ON
or OFF using the + or - button.
OFF: The monitors will not display the image of the
camera.
ON: The monitors will display the image of the camera.
The factory default setting is ON.
3. Press the SET/ESC button to return to the 5 MULTI-
PLEXER SETUP.
ON
ON
ON
ON
ON
ON
ON
ON

Advertisement

Table of Contents
loading

Table of Contents