Search Record Function - Panasonic WJ-HD500A Operating Instructions Manual

• Jump search
The recorded images can be searched by jumping to
the adjacent record from the currently selected record.
During playback, the SHUTTLE Ring jumps the image
to the beginning of the next or previous record when
NORMAL (default setting) is selected for the JOG/
SHUTTLE function in the setup, or the JOG Dial skips
the image when REVERSE is selected.
Note: Confirm that the indicator in the ALARM
SEARCH button is not lit by pressing the button.
Clockwise: Jumps forward to the beginning of the next
record.
Counterclockwise: Jumps backward to the beginning
of the previous record.
• Alarm jump search
The recorded alarm images can be searched by jump-
ing to the next alarm recording from the currently
selected record while the ALARM SEARCH indicator is
on.
During playback, rotate the JogDial clockwise or coun-
terclockwise to move to the beginning of the record
when NORMAL is selected. When REVERSE is select-
ed, rotate the ShuttleRing.
After jumping to an alarm recording, the Disk Recorder
resumes playback.
Notes:
• Confirm that the indicator in the ALARM SEARCH
button is lit by pressing the button.
• The recorded alarm images that the TRIGGER
ACTION is set to REC+ALM are only enabled play-
back.
The recorded alarm images that the TRIGGER
ACTION is set to REC are disabled playback.
ALARM SEARCH
Clockwise: Jumps forward to the beginning of the next
record.
Counterclockwise: Jumps backward to the beginning
of the previous record.
93
REV FWD
Rotate
REV FWD
Rotate

Search Record Function

The Disk Recorder has two search functions.
The procedures below describe how to search and play
back records.
1. Select the group to be played back by pressing the
GROUP SELECT button.
2. Pressing the ALARM SEARCH button toggles the indi-
cator in the button on and off.
Selecting either mode will display the list as shown
below.
On: Displays only
Emergency Record List of the selected group.
Off: Displays all Record Lists for the selected group.
3. Press the INDEX button to display the list selected on
the Multiscreen Monitor as shown below.
Pressing the INDEX button will toggle the window
between List and Thumbnail search.
• Record List
DATE MAY29.00
NO GROUP
000010009
000010008
000010007
000010006
INDEX
000010005
000010004
000010003
000010002
SEARCH: MAY29.00
ALARM # SEARCH:[DISPLAY]
SEL:←→
Search Editing Area
• Thumbnail Display
000010009
000000013
SEARCH MAY29.00
000000009
000000005
Search Editing Area
Notes:
• The displayed list can be switched to the selected
group by pressing the GROUP SELECT button.
• The display mode of the Record List can be
changed by pressing the ALARM SEARCH button
as explained in 2. above.
• If alarm and emergency records are selected while
displaying thumbnails, any thumbnails exceeding
255 are blacked out on the screen.
Thumbnails (up to 255) can be displayed by
searching according to the procedure described
below.
the Alarm (REC+ALM)
ALL GROUP
TIME REC-MODE
G2 23:59:59 T/L
G1 22:15:40 M/S ALM-TRM12
G3 21:00:07 O/S ALM-VMD3
ALL
17:33:05 T/L
7:23:11 T/L EMR
ALL
G4 6:59:44 M/S ALM-PC4
ALL 8:55:28 T/L MAN
G3 0:01:28 T/L ALM-TRM1
(TOTAL 2343RECORD)
0:01 G1
CHG:+– EXE:SET ESC:FSTOP
000010008 000010007 000010006
000000012 000000011 000000010
0:01 G1
000000008 000000007 000000006
000000004 000000003 000000002
and