Safety Features; Educating Users; Treadmill: Entering The Safety Code - Precor C956i Product Owners Manual

Safety Features

Before allowing users on Precor equipment, review the Important
Safety Instructions found at the beginning of this manual. You should
also teach your patrons how to safely use the equipment following the
guidelines in Educating Users.

Educating Users

Take time to educate users on the Important Safety Instructions found
in the User Reference Manual and Product Owner's Manual. Explain
to your club or facility patrons that they should:
• Hold onto a stationary handrail or handlebar while stepping onto the
treadmill, EFX, or climber or when getting comfortably seated on the
cycle.
• Face the display at all times.
• On treadmills: straddle the running belt and attach the safety clip to
clothing at waist level before touching the display.
Important: For safety, make sure users step onto the running belt
while it is moving at or below 1 mile per hour (1.6 kilometer per
hour).
• Hold on to a stationary handrail or handlebar with one hand
whenever reaching with the other hand to touch the display keys.
Product Owner's Manual: Safety Features

Treadmill: Entering the Safety Code

When the unit is shipped from the factory, the safety code protection
feature is disabled. If you wish to enable the safety code, refer to Club
Features. Inform users that the unit requests a safety code to help
prevent unauthorized use. When users select a program or press
QUICKSTART at the PRECOR banner, the following prompt appears:
ENTER SAFETY CODE TO UNLOCK MACHINE
Users have two minutes to press the following number key sequence
and continue their workout: 1, 2, 3, 4.
Important: Tell users to hold onto the handrail with one hand before
entering the safety code with the other hand.
If the correct keys are pressed, the chosen program begins. If the
code is incorrect, the display prompts the user to reenter the code
after a 30-second time out.
Note: On the treadmill, a 3-second countdown appears on the
display, and then the running belt starts moving. Refer to Workout
Options in the User's Reference Manual.
7