Adjusting The Back Height - Invacare P9000 XDT Owner's Operator And Maintenance Manual

Adjusting the Back Height

NOTE: For this procedure, refer to FIGURE 8.3.
NOTE: Back canes must be adjusted to the same height.
1. Remove the two mounting screws and locknuts that secure the two back canes to the
wheelchair frame.
2. Reposition the back canes to the desired height adjustment position.
3. Reinstall the mounting screws and locknuts that secure the back canes to the
wheelchair frame and securely tighten.
Mounting Screw
*NOTE: Holes numbered from bottom to top for reference only. (There are no numbers on the
back canes or wheelchair frame.)
Part No. 1118386
Back Height (in inches)
1
*HOLE#
HEIGHT 17
FIGURE 8.3 Adjusting the Back Height
41
SECTION 8—SEAT AND BACK
Back Cane
Wheelchair Frame
Locknut
2 3
18 19
™
P9000 XDT