Receiving; Moving; Unpacking And Assembling - Nautilus E10 Owners Instructions And Assembly

Receiving

When the carrier delivers your order, verify that the number and type of items matches what is
listed on the freight bill or express receipt.
Inspect the containers for damage. Itemize discrepancies and damage on the waybill and have
the carrier sign it. Failure to adequately describe external evidence of loss may result in the
carrier refusing to honor the claim. Do not discard the packing materials until you have verified
physical condition and proper operation.
Moving The E10 Elliptical Trainer
The E10 Elliptical Trainer is heavy and awkward, and requires two people to safely move it
from one location to another. With the help of another person, lift up the front of the machine until
the rear transport wheels are in contact with the floor. The machine can now be safely rolled on
the transport wheels. Note: the transport wheels are intended for indoor use only and should not
be rolled on concrete or asphalt surfaces.
Assembly Questions
If you have any questions or concerns regarding the assembly process, please contact a
Core Fitness Customer Excellence representative at 800-235-2233, or 276-773-2881 outside
the United States.
Unpacking And Assembling The E10 Elliptical Trainer
1. Inspect the containers for damage as described above.
2. Use shears or a razor knife to cut the straps securing the box cover to the pallet. Remove
the cover and set it aside.
3. Remove the packing materials from around the machine.
4. Use shears or a razor knife to cut the straps securing the parts box. Remove the parts box
and set it aside.
5. Use shears or a razor knife to cut the straps securing the machine to the pallet.
6. With the help of another person, move the mast assembly and rear assembly off of the
pallet and place them on the floor near the desired location for use.
7. Remove the packing materials from around the mast assembly and rear assembly.
assembly questions? call 800-235-2233 for help. 13