Toshiba RAV-SM563UT-E Service Manual page 187

No. Photo / Explanatory diagram
1-5
Valve fixing plate
1-6
1-7
Remove the motor base assembly, partition plate
Motor base assembly and the sound insulation board.
assembly
Related parts / Screws list
Partition plate
assembly
Motor base assembly
(Including motor and fan)
Partition plate assembly
Sound
insulation board
(Including reactor)
Remove the fixing screws of the heat exchanger and the
valve fixing plate. Remove the compressor fixing bolt.
Heat exchanger
Related parts / Screws list
Heat exchanger
Valve fixing plate
Compressor
Compressor
As shown in the left figure, remove the set of refrigera-
tion cycle assembly from the outdoor unit base plate.
* In this time, work attentively so that the cycle pipes are
not damaged by dent or deformation. Apply protective
measures to pipes if necessary.
– 187 –
Procedure
Part name
Screw type
Ø4 × 8
Ø4 × 8
Part name
Screw type
Ø4 × 8
Ø4 × 8
bolt
Used screw
Quantity
2
3
Used screw
Quantity
1
1
3