Envelope Feeder Paper Jams Service Check - Lexmark Optra N 4040 Service Manual

4040

Envelope Feeder Paper Jams Service Check

FRU
1 Envelopes
2 Envelope
Guide
Envelope
3
Feeder Roll-
ers
4 Envelope
Feeder Sepa-
ration Guide
and Lower
Separation
Roller Gap
Adjustment
2-42
Action
Be sure the recommended envelopes are being
used and that there are not too many envelopes in
the feeder.
The envelope guide may be pressing against
the envelopes. Advise the customer not to set
the envelope guide too close to the envelopes.
Envelope feeder rollers may be worn or
deformed. Run
Aids to determine which paper path is causing the
Replace any worn or deformed enve-
problem.
lope feeder rollers (21-10, 21-19).
The envelope feeder roller may not rotate
when a print is being made. Go to the
tration Roller Service Check" on page
Check the "Envelope Feeder Separation
Guide and Lower Separation Roller Gap
Adjustment" on page
the paper feed test in Diagnostic
4-3.
"Regis-
2-29.