4040
5. Remove the pick-up, feed, and separation rollers.
6. Remove the cable (1) from the guide (2).
7. Remove the 4 screws (3), and take out the pick-up unit (4).
For Assembly: Remove the pick-up feed and separation rollers dur-
ing assembly to prevent grease from getting on them. Be careful not
to get grease on the paper feed guide. Be sure to grease the gears
you replace to prevent noise. Use Permalub SHV-2 and apply a
small amount to 3 or more continuous cogs on the gear.
Repair Information 4-26