NordicTrack T9si User Manual page 12

15. Raise the Frame (57) to the position shown.
Have a second person hold the Frame until
this step is completed.
Orient the Storage Latch (54) so that the large
barrel and the Latch Knob (55) are in the posi-
tions shown.
Attach the Latch Bracket (36) and Storage Latch
(54) to the Base (95) with two 3/8" x 2" Bolts (5)
and two 3/8" Nuts (9).
Attach the upper end of the Storage Latch (54)
to the bracket on the Frame (57) with a 3/8" x 2"
Bolt (5) and a 3/8" Nut (9). Note: It may be nec-
essary to move the Frame back and forth to
align the Storage Latch with the bracket.
Lower the Frame (57) (see HOW TO LOWER
THE TREADMILL FOR USE on page 24).
16. Make sure that all parts are properly tightened before you use the treadmill. If there are sheets of clear
plastic on the treadmill decals, remove the plastic. To protect the floor or carpet, place a mat under the tread-
mill. Note: Extra hardware may be included. Keep the included hex keys in a secure place; one of the hex
keys is used to adjust the walking belt (see pages 26 and 27).
15
57
9
55
12
5
54
Large
Barrel
36
95
9
5