Polar Electro F6 User Manual page 11

3. Lift the transmitter off your chest and moisten the two grooved electrode areas on the back.
4. Check that the wet electrode areas are firmly against your skin and that the Polar logo is in a
central, upright position.
5. Wear the wrist unit as a watch. In the Time of Day display, press OK to enter the menu.
Exercise is displayed. The wrist unit automatically starts to search for your heart rate.
Your heart rate and the framed heart symbol
The frame around the heart symbol indicates that your heart rate is coded.
Your heart rate is measured, but not recorded, until you have started to exercise. To record
your heart rate and other exercise data, see the chapter Start Exercising.
Note: If the wrist unit does not receive your heart rate - - /00 is displayed, check that the transmitter
electrodes are wet and that the strap is snug enough. Bring the wrist unit up to your chest near the Polar logo
on the transmitter. The wrist unit starts to seek the heart rate signal again.
appear in a maximum of 15 seconds.
ENGLISH 13