Lexus 2003 LS Owner's Manual page 94

INTERIOR EQUIPMENT
6. Test the operation of the HomeLink
programmed button. Check to see if the gate/device operates
correctly.
7. Repeat steps 1 through 6 for each remaining HomeLink
button to program another device.
Programming other devices
To program other devices such as home security systems,
home door locks or lighting, contact your authorized Lexus
dealer for assistance.
Reprogramming a button
R
Individual HomeLink buttons cannot be erased, however, to
reprogram a single button, follow the procedure "Programming
R
the HomeLink ".
(b) Operating the HomeLink
R
To operate the HomeLink , press the appropriate HomeLink
button to activate the programmed device. The HomeLink
indicator light should come on. The HomeLink
send the signal for up to 20 seconds as long as the button is
pressed.
80
R
by pressing the newly (c) Erasing the entire HomeLink
To erase all previously programmed codes at one time, press
R
and hold down the 2 outside buttons for 20 seconds until the
indicator light flashes.
If you sell your vehicle, be sure to erase the programs stored
in the HomeLink
B When programming the HomeLink
R B Do not use this HomeLink
R
R
R
continues to
(all three programs)
R
memory.
CAUTION
Transceiver, you may be operating a garage door or
other device. Make sure people and objects are out
of the way of the garage door or other device to
prevent potential harm or damage.
R
Universal Transceiver
with any garage door opener that lacks the safety
stop and reverse feature as required by federal safety
standards. (This includes any garage door opener
model manufactured before April 1, 1982.) A garage
door opener which cannot detect an object
(signaling the door to stop and reverse), does not
meet current federal safety standards. Using a
garage door opener without these features increases
risk of serious injury or death.
R
memory
R
Universal