Operation Procedure - Lexus 2003 LS Owner's Manual

r Operation Procedure
The operation procedure is shown as follows. For the detailed information, see Section 3–1 in the "Owner's Manual".
Y Setting

Push the main switch to turn on the system. The "CRUISE" indicator light in the instrument cluster comes on and "RADAR READY"
appears on the multi–information display.
B Depress the accelerator or brake pedal to attain the desired speed.
A Press the control lever downward in the "SET/COAST" direction and release it.
This sets the vehicle at that speed.
If a vehicle is detected ahead of you: Your cruising speed changes in proportion to the speed
of the vehicle ahead to maintain an appropriate distance from your vehicle to the vehicle ahead.
If there was no vehicle ahead, your cruising speed will be gradually increased up to the preset speed.
If no vehicle is detected ahead of you: Your cruising speed is
maintained at the preset speed.
Y Cancelling
To stop the operation: Push the main switch to turn off.
To stop the operation temporarily:
Pull the control lever in the "CANCEL" direction.
To resume follow–up cruising or crusing at fixed speed,
press the control lever upward and release it.
See Owner's Manual for Complete Information.
− 6 −