Table of Contents
Advertisement
GBC 4064WF
Figure 6
Figure 7
Figure 8
© 2005 General Binding Corporation
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500
Rewind Take up tubes: (Fig. 6 – Item A)
This machine has three dedicated rewind film
take up tube positions. Only one of them is
shown in Fig. 6.
Two rewind tubes are on top front and back
A
and one rewind tube is on the lower back side
of laminator.
Removable Chill Idler: (Fig. 7 – Item A)
The removable chill Idler is used to help
smooth out the laminating film during the
cooling process.
A
Chill Idler Storage Area: (Fig. 8 - Item A)
Chill Idler can be stored in the lower brackets
when the machine is set up for board
mounting.
A
Operation Manual
Page 11
Advertisement
Table of Contents
