Refer to the table below for recommended cable sizes.
Cable length
1. Breaker panel to autopilot computer.
2. Autopilot computer to drive unit motor
(Length refers to each of the two cables)
Up to 3 m (10 ft.)
Up to 6 m (20 ft.)
Up to 10 m (32 ft.)
Up to 16 m (52 ft.)
Remove the bottom cover to get access to the plug-in
terminals.
Provide sufficient wire length so that the plug-in
terminals can be easily connected and disconnected.
Pull out each terminal before connecting the wires.
Remove all strands before putting back the terminal
cover.
Fuse
12 | Installation
Drive unit voltage
12 V
2
AWG
mm
AWG
12
2,5
12
10
4
10
8
6
10
6
10
Ground terminal
Plug-in terminal
Cable strap
Cable retainer
24 V
2
mm
2,5
2,5
4
8
6