Port Configuration - HP proCurve User Manual

A static IP address is a unique address that is assigned to one client only. Static
addresses are used for an extended time period.

Port Configuration

The Port Configuration page displays information about the hub ports. To
enable a port, select the port number in the page, then click Enable Selected
Ports. Use the Disable Selected Ports button to disable a port or group of ports.
Figure 12-9. Hub Port Configuration
The information is described in the following table.
Table 12-3. Port Information
Setting
Port
State
Connected
Description
The port number.
The port can be on or off.
Yes: A device is connected to this port.
No: There is nothing connected to this port.
Partitioned: The node is disconnected from the network and the
traffic that the port generates is lost.
Polarity Reversed: Some signals in the cable are reversed due
to a miswired cable.
Accessing Hub Features
Configuring Your Device
12-11