Performing Diagnostics; Performing A Ping/Link Test - HP proCurve User Manual

Performing Diagnostics

Using HP TopTools, you can help isolate faults by running device self-tests,
Link tests, and Ping tests (IP networks).
This section includes information on:
I

Performing a Ping/Link Test

I Rebooting a Device
Resetting a Hub to Factory Default Settings
I
I Producing a Configuration Report
Performing a Ping/Link Test
You can isolate faults by running Link tests or Ping tests (IP networks). Select
the Diagnostics tab and click on the Ping/Link Test button. Choose a test for
sending test packets to, or through, a device in order to verify the path between
two network devices. In the Destination MAC/IP Address field enter the IP
address or MAC address of the device for which you want to test the connec-
tion. Specify the number of packets to send and the timeout (in seconds) for
each test. Click on the Start button to start the test. Click on the Stop button
to stop the test.
15