Initial Printing Supplies Installation; Recording Paper Installation (Recording Paper Tray) - Toshiba E-studio170F Quick Start Manual

3. INITIAL PRINTING SUPPLIES INSTALLATION

Recording Paper Installation (Recording Paper Tray)

About Recording Paper:
- Use only recommended paper brands to optimize your facsimile performance. Contact your authorized
TOSHIBA dealer for more information.
- Remove the recording paper when storing or relocating your facsimile.
- Avoid using damaged, folded or misaligned recording paper. Use of damaged paper could cause double
feeding or paper jamming.
- Use of damp recording paper will cause poor printing over all or part of the image area. If the paper is
excessively moist, print quality may become uneven and voiding may occur. Replace the paper, should
this condition exist.
3
- Do not add paper on top of the paper already in the machine. If you wish to add paper, first remove the
existing paper. Then stack the existing paper with the new paper before inserting into the machine.
1
Remove the Bypass Tray
- Remove the Bypass Tray from Recording Paper Tray.
2
Open the Paper Guides
- Pull down the front plate of the Recording Paper Tray, and then
fully extend the Paper Guide with the hook on the right.
3
Prepare Recording Paper Sheets
- Prepare new recording paper sheets by holding both ends and
flexing several times.
This will separate the sheets and provide optimum feeding.
Align the stack so that all four corners are neatly aligned.
Be sure to load the recording paper in accordance with any paper
manufacturer's printing side instruction. Some papers have a
preferred image side. This image side should be placed face up
in the Recording Paper Tray.
24
3.SETUP FLOW