JVC HR-DVS1EK Instructions Manual page 45

AUDIO
T W
1 2 3
2
4 5 6
7 8 9
0
4
1
DV VHS
PLAY
STOP
6
7
NOTES:
When monitoring the sound during Audio Dubbing, the normal
PAUSE soundtrack is automatically selected. If you wish to hear the mixed
sound (Hi-Fi + Normal soundtracks), press AUDIO on the remote
control to select "HIFI NORM" (VHS deck only
Audio dubbing stops automatically when the counter reaches
"0:00:00", and the recorder enters the Play mode (VHS deck
only). Check the counter reading before dubbing.
Audio dubbing is also possible using the rear panel AV1 IN/OUT
or AV2 IN/DECODER connector. When using these connectors,
make sure to select the correct input mode in step 3.
Audio dubbing cannot be performed on a VHS/S-VHS
cassette that has had its record safety tab removed, or on a
Mini DV cassette that has had its erase protection switch set
to "SAVE".
When playing back an audio-dubbed tape on the VHS deck,
press AUDIO on the remote control to select the soundtrack
you wish to hear (
dubbed Mini DV tape on the DV deck, set "32kHz MODE" to
"SOUND2" (
Audio dubbing is not possible using the DV IN/OUT
connector.
START DUBBING
Engage the audio component's Play mode, then press
PLAY to start the tape in your recorder. Audio dubbing
begins at this point.
" " blinks and " " is displayed on the front display
panel.
To stop dubbing temporarily, press PAUSE. Press
PLAY to resume dubbing.
END AUDIO DUBBING
Press STOP to stop the tape in your recorder, and
engage the audio component's Stop mode.
pg. 30). When playing back an audio-
pg. 31).
45
pg. 30).