Normal Dubbing - JVC HR-DVS1EK Instructions Manual

Normal
Dubbing
SP/LP
1
PLAY
RECORD
NOTES:
There may be a discrepancy of several seconds between
where you intend editing to start, and where it actually starts.
The on-screen display during the operation or dubbing is not
recorded.
When dubbing from the VHS deck to the DV deck, also set
"SOUND MODE" to the appropriate mode (
When dubbing from the DV deck to the VHS deck:
You can record the date and time by setting "DISPLAY" to
"ON" ( pg. 14).
You can also insert playback effects (
When dubbing a Mini DV tape that was produced by audio
dubbing, you need to set "32kHz MODE" to the appropriate
mode before playing the tape (
0
4
VHS
DV VHS
PAUSE
START
pg. 31).
pg. 28).
pg. 31).
You can dub selected scenes on a tape, starting and stopping
wherever you wish.
LOAD CASSETTES
1
Insert a VHS (or S-VHS) cassette and a Mini DV
cassette.
SELECT DUBBING
DIRECTION
2
Press when you want playback on the DV deck and
recording on the VHS deck.
OR
Press when you want playback on the VHS deck and
recording on the DV deck.
SET TAPE SPEED
3
Press VHS or DV for the recording deck, then press
SP/LP ( ).
LOCATE START POINT
4
For the playing deck:
Press VHS or DV to selsct the playing deck.
Press PLAY to start playback of the tape in the playing
deck, and press PAUSE to pause playback when you
find the point where you want to start dubbing.
For the recording deck:
Press VHS or DV to select the recording deck. Press and
hold PAUSE and press RECORD so that the recording
deck enters the Record-Pause mode.
START DUBBING
5
Press START.
PAUSE DUBBING
6
Press START.
END DUBBING
7
Press STOP. Then press VHS or DV to select the playing
deck and press STOP.
35