Audio Dubbing - JVC HR-DVS1EK Instructions Manual

Mini dv/s-vhs video cassette recorder
Table of Contents

Advertisement

44

Audio Dubbing

CD Player etc.
Audio mixer
Original sound
AUDIO OUT
NUMBER "0"
DV
1
PLAY
NOTE:
To use the DV deck as the recording deck, press
DV after selecting "L-3" in step 3.
CD Player etc.
Mixer output
AUDIO
T
W
1
2
3
2
4
5
6
7
8
9
0
4
TV PROG
VHS
DV
VHS
PAUSE
ADVANCED OPERATIONS (cont.)
VHS Audio Dubbing
Audio dubbing replaces the normal audio sound of a previously
recorded tape with a new soundtrack.
Normal audio track
Video/Hi-Fi audio
track
DV Audio Dubbing
This function lets you record new audio, without erasing the
original audio, on a DV tape that was recorded with "SOUND
MODE" set to "32kHz" (
audio that you recorded by connecting other audio or video
equipment to this recorder.
You cannot perform audio dubbing on a tape that was recorded
with "SOUND MODE" set to "48kHz", on a tape that was
recorded at the "LP" speed, or on a blank tape.
MAKE CONNECTIONS
1
Connect an audio component to the AUDIO L + R
connectors on the recorder's front panel.
SELECT RECORDING DECK
2
Press VHS.
SET INPUT MODE
3
Press NUMBER key "0" and/or TV PROG so that "L-3"
appears in place of a preset number.
LOCATE START POINT
4
Press PLAY to start playback of the tape in your
recorder, and press PAUSE when you find the point
where you want to start dubbing.
ENGAGE AUDIO DUBBING
5
Press A. DUB.
and then
pg. 31). You can then play back
When connecting monaural equipment, use only the
recorder's AUDIO L connector.
It is possible to take the original sound recorded on
the tape in your recorder and mix it with other
sounds from a microphone, CD player etc. To
perform this audio dubbing with audio mixing,
connect as in the diagram on the left.
Your recorder enters the Audio Dubbing Pause mode.
(" " blinks, " " and " " light up on the front display
panel.)
To perform audio dubbing with audio mixing, press
AUDIO on the remote control to select "HIFI L
or "L
R" at this point. When using the DV deck
as the recording deck, also make sure that "32kHz
MODE" is set to "SOUND1" (
* Audio dubbing with audio mixing is not possible if
you're using a monaural audio component, or if
you don't have an audio mixer.
Pre-recorded tape
Audio-dubbed tape
R"
pg. 31).

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents