Installing The Paper Roll - VeriFone Vx 810 Duet Reference Manual

Installing the Paper Roll

A fast, quiet integrated thermal printer (ITP) is built into the base unit of the
V x 810 DUET. Before you can process transactions through the V
that require a receipt or record, you must install a roll of thermal-sensitive
paper in the printer.
The ITP uses a roll of single-ply, thermal sensitive paper 47 mm (2.24 inches)
wide by 25 meter long paper. A pink out-of-paper indicator line appears on
the edge of the paper approximately 18 inches before the end of the roll.
When this line appears, only enough paper remains on the roll to complete
one transaction.
Poor-quality paper can jam the printer and create excessive paper dust.
Store thermal paper in a cool, dry, dark area. Handle thermal paper carefully:
impact, friction, temperature, humidity and oils affect the color and storage
characteristics of the paper. Never load a roll paper with folds, wrinkles,
1 Lift the paper door.
2 Lift the paper tray to remove any partial roll of paper left inside.
3 Hold the roll so the paper feeds from the bottom of the roll.
X
7 V 810 DUET REFERENCE GUIDE
tears, or holes at the edges in the print area.
Figure 6 Opening the Paper Door
x 810 DUET