Setup - VeriFone Vx 810 Duet Reference Manual

Setup

The Setup submenu options for this application are as follows:
Demo – Launches the demo mode. When turned on, it enables
training and/or testing to occur without actual communications
with the host.
Batch – Launches the Batch data records/table that sets up
batch information for each host, such as the maximum number of
transactions stored in a batch as well as the batch size.
Printer – Launches the Printer setup data records/table. It controls
the value settings for printing receipts and reports.
Terminal – Launches the terminal setup data records/table that
controls the parameter value settings for operations that can be
performed on the terminal.
Merchant – Launches each Host data record/table that stores
parameter setting and flags specific to that individual host.
Comm – Launches the Communications setup table.
Communication parameters control the dial communication process
between the terminal and host.
Host – Launches the Host Definition setup data records/ table
that control host specific parameter value settings such as:
communication types, packet types and settlement protocol,
relative to each Host.
Merchant IDs – Launches one record for each Merchant
supported. The Merchant ID data record/table contains Merchant
ID information that identifies each merchant's preference of
information printed on the receipt. It also stores the merchant
password, invoice number sequence, auto settlement date and
time information, and what report will print at settlement.
Merchant Hosts – Launches each Merchant Host setup table/
data record that controls host batch information for each merchant.
Download – Initiates a full or partial dial download of the
application or configuration parameters to the terminal.
Edit Cards – Launches access to the Card Definition Setup table/
data records that controls the parameter settings for each card
range.
X
17 V 810 DUET REFERENCE GUIDE