Sending Scanned Data; Sending An E-Mail - Konica Minolta bizhub 215 Quick Manual

5.1

Sending scanned data

5 Using as a Scanner
5.1 Sending scanned data
Scanned data can be sent via an E-mail or to the FTP or SMB server.
To send scanned data, Extended Operation Panel MK-733 combined with Network Card NC-504 or Im-
age Controller IC-209 is required.

Sending an E-mail

The following describes the procedure for sending scanned data via an E-mail.
1
Press Scan.
2
Load the original.
% For details on how to load the original, refer to page 1-36.
3
Specify the resolution setting.
% Use +, to select the correct setting, then press OK.
% Select [150e150dpi], [300e300dpi], or [600e600dpi].
% When [Color] or [Gray] is specified for the color setting, [600e600dpi] is not displayed.
4
Specify the color setting.
% Use +, to select the correct setting, then press OK.
% Select [BW], [GRAY], or [COLOR].
% If [BW] is selected with [Image Format] set to [JPEG], [PDF] is automatically selected.
bizhub 215
QUALITY
RESOLUTION
COLOR SETTING
ORIGINAL
RETURN
QUALITY
RESOLUTION
COLOR SETTING
ORIGINAL
RETURN
QUALITY(RESOLUTION)
150x150dpi
300x300dpi
600x600dpi
COLOR SETTING
BW
GRAY
COLOR
5
5-3