Invacare Top End Force Handcycle Series User Manual page 59

Installing the Fork
1. Set the front of the frame on a stable surface that elevates the frame
slightly off the ground.
2. Slide lower fork clamp over the fork stem. Push the fork until the
upper fork clamp engages the upper portion of the fork stem.
3. Install and loosely attach the compensator bolt.
4. Loosely attach upper fork clamp / bolts with the lock-nuts facing
upwards. DO NOT fully tighten.
5. Install and tighten lower cap and bolt.
6. Tighten the lower fork clamp bolts.
7. Tighten the top cap bolt to remove play from the assembly.
8. Tighten the upper fork clamp.
9. Tighten the compensator bolt.
10. Tighten compensator set screws.
11. Install front wheel. Refer to Removing/Installing the Front Wheel on
page 60.
Part No 1171790
Compensator Bolt
and Set Screws
Lower Cap
and Bolt
Lower Fork
Clamp Bolts
59
Invacare® Top End® Force™Handcycle Series
10 SERVICE PROCEDURES
Top Cap
Bolt
Upper Fork
Clamp