Invacare Top End Force Handcycle Series User Manual page 37

20. Remove the backrest support bar from the clamp on the frame.
21. Remove and retain the bolt, nut and washer. Insert the curved spacers.
22. Slide a washer onto the bolt. Use a small wrench to align the holes and slide the bolt through the holes and secure with the nut.
23. Tighten the top of the backrest support bar to the top of the backrest using a 5mm wrench and 10mm box wrench.
24. Slide the backrest support bar through the clamp on the frame. Tighten with a 5mm wrench.
25. Adjust the backrest angle as required. refer to Adjusting Back Angle on page 53.
STEP 20
Part No 1171790
STEP 23
STEP 21
STEP 24
37
Invacare® Top End® Force™Handcycle Series
6 ASSEMBLY - FORCE-2 ONLY
STEP 22