Invacare Top End Force Handcycle Series User Manual page 26

3 SAFETY
8. Shift body weight onto object while transferring.
9. To transfer out of the handcycle, reverse the procedure and use the backrest to push off.
WARNING
If installed on handcycle, parking brake and wheel locks MUST be engaged.
The steps below are specifically for transfer to/from a wheelchair and DO NOT correspond
to the steps in the procedure on the previous page. Follow a similar procedure to transfer
to/from an object other than a wheelchair. Refer to the steps on the previous page for more
information.
STEP A: Shift body weight to the edge of the wheelchair upholstery closest to the handcycle.
STEP B: Lift and place LEFT leg across seat.
STEP C: Place LEFT hand on the left side of handcycle seat frame, NOT on crank.
STEP D: Place RIGHT hand on the wheelchair frame.
STEP E: Lift and shift weight down into handcycle seat.
STEP F: Place both legs onto handcycle footrests and secure safety straps.
Invacare® Top End® Force™Handcycle Series
26
Footrest

Handcycle shown for clarity
Handcycle Pedals
(rotate to the 3 o'clock position)
Seat Frame
Wheelchair
Handcycle
Part No 1171790