Invacare Top End Force Handcycle Series User Manual page 33

4. Set the frame on a flat stable surface with a support underneath the front frame.
5. Attach the plate to the rubber dampener by threading the bolt into the dampener.
6. Place the fork clamp loosely over the lower part of the fork.
7. Slide the lower half of the clamp over the lower section of the front of the frame.
8. Place the second clamp over the frame and the fork/frame attachment plate.
9. Securely tighten the upper and lower clamps.
STEP 4
STEP 6
Part No 1171790
STEP 5
33
6 ASSEMBLY - FORCE-2 ONLY
STEP 7
STEP 9
Invacare® Top End® Force™Handcycle Series
STEP 8