Invacare Top End Force Handcycle Series User Manual page 38

6 ASSEMBLY - FORCE-2 ONLY
26. Remove left drafting bumper clamp.
27. Slide the flag holder over the bumper receiver in place of the drafting bumper clamp removed in STEP 26.
28. Slide the drafting bumper into the bumper receivers and tighten both right and left bumper clamps with a 4mm wrench.
29. Insert flag.
STEP 26
30. Tighten crank support with an Allen wrench.
31. Adjust footrests to proper length and tighten with a 5mm wrench.
 DO NOT overtighten. The footrests should not turn.
32. Place caps over outside of rear wheel axles.
33. If the leg guard is not installed refer to Additional Options on
page 76.
The Rapid Fire Shifter and Brake is mounted on the

right handpedal. It can be moved to the left handpedal if
required.
34. To move the Rapid Fire Shifter and Brake, loosen the attaching
hardware, move the assembly to the left handpedal and attach with
hardware. Tighten securely.
Invacare® Top End® Force™Handcycle Series
STEP 27
38
STEP 28
STEP 30
STEP 31
STEP 32
Part No 1171790