Tuner Setting; Auto Channel Set; Manual Channel Set; Manual Clock Set - JVC HR-J692U Instructions Manual

– Initial Settings –
B
Select host channel
You can either select "AUTO" or enter a PBS channel number.
Press OK or to move the highlight bar to "HOST CH", then
e
press repeatedly until "AUTO" or the desired PBS channel
rt
number is selected.
C
Select D.S.T. mode
Press OK or to move the highlight bar to "D.S.T.", then press
e
repeatedly until the desired setting is selected.
rt
AUTO: Select if you want to adjust your VCR's clock
automatically by the incoming signal from the host
channel. (Auto Daylight Saving Time enables automatic
adjustment of the VCR's clock at the start and end of
Daylight Saving Time.) Be sure to select the correct time
zone manually in step 4.
ON: Adjustment will be made by the built-in clock itself.
OFF: Select when Daylight Saving Time does not apply to you.
D
Select time zone
Press OK or to move the highlight bar to "TIME ZONE", then press
e
repeatedly until "AUTO" or the desired time zone is selected.
rt
Each time you press the button, the time zone changes as follows:
AUTO ATLANTIC EASTERN
{ { {
MOUNTAIN PACIFIC
{ { {
(back to the beginning)
{
E
Complete Semiauto Clock Set
Press MENU to return to normal screen. Turn off the VCR. "Aut"
will appear on the display panel while the clock is being set. The
current clock time will appear automatically when the clock
setting is complete.
Selections of host channel, D.S.T. mode and time zone will be
reset to "AUTO" after a power failure occurs.
Setting clock manually

— Manual Clock Set

First follow steps 1 to 2 in "Preparations" (
the following steps.
A
Set time, date and year
Press until the desired time appears,
rt
then press OK or . Set the date and year
e
in the same way.
Holding changes the time in 30-
rt
minute intervals, or changes the date in
15-day intervals.
B
Select D.S.T. mode
Press OK or to move the highlight bar to
e
"D.S.T.", then press to select the
rt
desired setting.
ON: Adjustment will be made by the
built-in clock itself.
OFF: Select when Daylight Saving Time
does not apply to you.
C
Start clock
Press MENU and normal screen appears.
To make corrections any time during the process
Press OK or repeatedly until the item you want to change
e
blinks, then press .
rt
The clock set manually will be lost after a power failure occurs.
CENTRAL
{
ALASKA HAWAII
{
pg. 6), then go to
CLOCK SET
TIME DATE
– –:– –AM 1/ 1
AUTO CLOCK : ON
HOST CH : AUTO
D.S.T. : AUTO
TIME ZONE : AUTO
PRESS ( , ), THEN (OK)
PRESS (MENU) TO END
CLOCK SET
TIME DATE
1 : 00 AM 12/ 24
AUTO CLOCK : OFF
D.S.T. : ON
PRESS ( , ), THEN (OK)
PRESS (MENU) TO END

Tuner Setting

Turn on the VCR and TV, and select the VCR channel (or AV
mode).
Setting channels automatically

— Auto Channel Set

Perform Auto Channel Set only if channels have not been set
correctly by the Plug&Play setting.
A
Access Main Menu screen, then Tuner
Set screen
Press MENU on the Remote. Press
move the highlight bar (arrow) to "TUNER
SET", then press OK or
B
Perform Auto Channel Set
Press to move the highlight bar
rt
(arrow) to "AUTO CHANNEL SET", then
press OK or
e
band (TV or CATV) automatically during
Auto Channel Set.
When Auto Channel Set is complete,
"SCAN COMPLETED" appears on
screen.
If the scan was unsuccessful, "SCAN
COMPLETED–NO SIGNAL–" appears
on screen. Check the connections and
start again.
Press MENU to return to normal screen.
Setting channels manually

— Manual Channel Set

You can add the channels you want or delete the channels you do
not want manually.
A
Access Main Menu screen, then Tuner
Set screen
YEAR
Press MENU on the Remote. Press
03
move the highlight bar (arrow) to "TUNER
(CATV)
SET", then press OK or
B
Access Manual Channel Set screen
Press to move the highlight bar
rt
(arrow) to "MANUAL CHANNEL SET",
then press OK or
YEAR
03 WED
C
Add or skip desired channels
To add channels
A Press the Number keys on the Remote
to input a channel number you want to
add.
B Press OK or
C Repeat A to B to add other channels.
Press MENU to return to normal screen.
To skip channels
A Press
rt
want to skip.
B Press OK or
C Repeat A and B to skip other channels. Press MENU to return
to normal screen.
After a power failure occurs, band selection will be reset to
"CATV".
— 7 —
to
rt
.
e
. The VCR selects the correct
to
rt
.
e
.
e
to set to "ADD".
e
or the Number keys to select a channel number you
to set to "SKIP".
e
MAIN MENU
FUNCTION SET
TUNER SET
INITIAL SET
PRESS ( , ), THEN (OK)
PRESS (MENU) TO END
TUNER SET
BAND CATV
AUTO CHANNEL SET
MANUAL CHANNEL SET
SELECT WITH ( , ) AND (OK)
PRESS (MENU) TO END
AUTO CHANNEL SET
SCANNING...
PRESS (MENU) TO END
MAIN MENU
FUNCTION SET
TUNER SET
INITIAL SET
PRESS ( , ), THEN (OK)
PRESS (MENU) TO END
TUNER SET
BAND CATV
AUTO CHANNEL SET
MANUAL CHANNEL SET
SELECT WITH ( , ) AND (OK)
PRESS (MENU) TO END
MANUAL CHANNEL SET
(CATV)
CH 45 ADD
PRESS NUMBER KEY (0–9)
OR ( , ), THEN (OK)
PRESS (MENU) TO END