Setting Your Vcr's Tuner - JVC HR-J220U Instructions Manual

Setting your VCR's tuner
The Auto Set feature introduced here automatically assigns receivable channels in your area to the CHANNEL UP/DOWN buttons
and skips the others so you won't have to go through any "blank" channels to get to the one you want,
POWER ON;
SELECT CHANNEL
3 OR 4 (OR AV MODE)
5
l You canalso use the POWER, MENU,SET /
J
and SELECTbuttons on the VCR.
Press POWER.
• If watching on channel 3 or 4, press TV/VIDEO to select
the VIDEO mode. The VCR's VIDEO indicator will light.
Press MENU.
• The Main Menu screen will /" TUNERSET "_
tBAND
/ /
appear. I AFC
| AUTO CHANNEL SET |
3 Press SET to move the cursor _ M_U.LC_NNELSET|
to "TUNER SET", and then
press SELECT.
/ PRESS(SELECT, SET+/-) /
4
Press SET to move the cursor _._____PaPaESS
(MENU)T0
EN__J
tO "BAND", and then press
SELECT.
_" 11" .... _' ........ B_ '_......... _ij: _,_ _ ;_:,7"_ _-: ,,
Press SET to choose "TV" or
"CATV".
• The BAND select feature
has 2 settings (TV and
CATV). Set to TV if your
antenna provides only UHF
and VHF channels. Set to
CATV if your antenna
system is a cable TV line.
Press MENU.
I BAND
PRESS (SET+/-) FOR CHOICE
PRESS (MENU) TO END
Press SET to move the cursor to "AUTO CHANNEL SET",
and then press SELECT.
• Auto set is in progress and "SCANNING..." is displayed.
• When available channels are scanned, "ADD" will be
displayed on the screen.
• When unavailable channels are skipped, "SKIP" will be
displayed.
• After completion of auto set, the lowest tuned-in channel
number and "SCAN COMPLETED" are displayed.
• If "SCAN COMPLETED -- NO SIGNAL --" is
displayed, check the band setting and connections, and
start again. _ p.10, 11.
BAND TUNER SET
ArC
l)AUTO CHANNEL S ET
MANUAL CHANNEL SET
PRESS (SELECT, SET +/-)
PRESS (MENU) TO END
AUTO CHANNEL SET "_
CH, |
SCANNING ... /
Press MENU as many times as necessary to exit.
I3