JVC HR-J695U Instructions Manual

Jvc video cassette recorder instructions
Hide thumbs Also See for HR-J695U:

Advertisement

LPT0634-001A
COPYRIGHT © 2001 VICTOR COMPANY OF JAPAN, LTD.
Dear Customer,
Thank you for purchasing the JVC VHS video cassette recorder.
Before use, please read the safety information and precautions to
ensure safe use of your new VCR.
CAUTIONS
The lightning flash with arrowhead symbol, within
an equilateral triangle, is intended to alert the user
to the presence of uninsulated "dangerous voltage"
within the product's enclosure that may be of
sufficient magnitude to constitute a risk of electric
shock to persons.
The exclamation point within an equilateral triangle
is intended to alert the user to the presence of
important operating and maintenance (servicing)
instructions in the literature accompanying the
appliance.
WARNING:
TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE
THIS UNIT TO RAIN OR MOISTURE.
CAUTION:
This video cassette recorder should be used with AC 120V
60Hz only.
To prevent electric shocks and fire hazards, DO NOT use any
other power source.
CAUTION:
TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF
PLUG TO WIDE SLOT, FULLY INSERT.
ATTENTION:
POUR ÉVITER LES CHOCS ÉLECTRIQUES, INTRODUIRE LA
LAME LA PLUS LARGE DE LA FICHE DANS LA BORNE
CORRESPONDANTE DE LA PRISE ET POUSSER JUSQU'AU
FOND.
Note to CATV system installer:
This reminder is provided to call the CATV system installer's
attention to Article 820-40 of the NEC that provides guidelines
for proper grounding and, in particular, specifies that the cable
ground shall be connected to the grounding system of the
building, as close to the point of cable entry as practical.
CAUTION:
Changes or modifications not approved by JVC could void
user's authority to operate the equipment.
VIDEO CASSETTE RECORDER
HR-J695U
,
d
INSTRUCTIONS
Declaration of Conformity
Model Number:
HR-J695U
Trade Name:
JVC
Responsible Party:
JVC Americas Corp.
Address:
1700 Valley Road Wayne, N.J. 07470
Telephone Number: 973-317-5000
This device complies with Part 15 of FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this
device must accept any interference received, including
interference that may cause undesired operation.
Failure to heed the following precautions may result in damage
to the VCR, Remote or video cassette.
1. DO NOT place the VCR ...
... in an environment prone to extreme temperatures or
humidity.
... in direct sunlight.
... in a dusty environment.
... in an environment where strong magnetic fields are
generated.
... on a surface that is unstable or subject to vibration.
2. DO NOT block the VCR's ventilation openings.
3. DO NOT place heavy objects on the VCR or on the Remote.
4. DO NOT place anything which might spill on the top of the
VCR or on the Remote.
5. AVOID violent shocks to the VCR during transport.
For Customer Use:
Enter below the Model No. and Serial No. which are located
on the rear of cabinet. Retain this information for future
reference.
Model No.
Serial No.
● Cassettes marked "VHS" (or "S-VHS") can be used with this
video cassette recorder. However, S-VHS recording is not
possible with this model.
● This model is equipped with SQPB (S-VHS QUASI PLAYBACK)
that makes it possible to play back S-VHS recordings with
regular VHS resolution.
● HQ VHS is compatible with existing VHS equipment.
● As an E
®
S
Partner, JVC has determined that this
NERGY
TAR
product or product model meets the E
for energy efficiency.
Printed in China
1201 MNVfPJfBJ
®
S
guidelines
NERGY
TAR

Advertisement

Table of Contents
loading

Summary of Contents for JVC HR-J695U

  • Page 1 LPT0634-001A COPYRIGHT © 2001 VICTOR COMPANY OF JAPAN, LTD. Dear Customer, Thank you for purchasing the JVC VHS video cassette recorder. Before use, please read the safety information and precautions to ensure safe use of your new VCR. CAUTIONS The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage”...
  • Page 2: Important Product Safety Instructions

    IMPORTANT PRODUCT SAFETY INSTRUCTIONS Electrical energy can perform many useful functions. But improper use can result in potential electrical shock or fire hazards. This product has been engineered and manufactured to assure your personal safety. In order not to defeat the built-in safeguards, observe the following basic rules for its installation, use and servicing.
  • Page 3 SERVICING 1. Servicing If your product is not operating correctly or exhibits a marked change in performance and you are unable to restore normal operation by following the detailed procedure in its operating instructions, do not attempt to service it yourself as opening or removing covers may expose you to dangerous voltage or other hazards.
  • Page 4: Buttons, Connectors And Indicators

    Buttons, Connectors and Indicators Front Panel VIDEO/AUDIO input connectors Display panel Play indicator Record indicator Rear Panel AC power cord Cassette loading slot Infrared beam receiving window Timer mode indicator Channel and auxiliary input/Clock timer VCR mode indicator...
  • Page 5: Connections And Plug&Play Setting

    – Buttons, Connectors and Indicators – Remote Number keys On-screen display If you press OSD on the Remote when “SUPERIMPOSE” is set to “ON”, you can see the current VCR status on the TV screen. Press OSD again to exit on-screen display. The indications are not recorded even if the VCR is in the recording mode.
  • Page 6: Initial Settings

    – Connections and Plug&Play Setting – Perform Plug&Play setup Plug the AC power cord into an AC outlet. Do not turn on the VCR. The clock and tuner channels will be set automatically. The time and date can be set automatically by the clock setting data transmitted from one of the regular TV broadcast channels.
  • Page 7: Tuner Setting

    – Initial Settings – Select D.S.T. mode Press OK or to move the highlight bar to “D.S.T.”, then press repeatedly until the desired setting is selected. AUTO: Select if you want to adjust your VCR’s clock automatically by the incoming signal from the host channel.
  • Page 8: Basic Playback

    Playback Basic Playback Load a cassette Make sure the window side is up, the rear label side is facing you and the arrow on the front of the cassette is pointing towards the VCR. ● Do not apply too much pressure when inserting. ●...
  • Page 9: Basic Recording

    – Playback – Playing back tape repeatedly (100 times) — Repeat Play During playback, press and hold PLAY ( 5 seconds. The play indicator ( ) on the display panel starts blinking slowly. To stop playback, press STOP ( or STOP/EJECT ( ) on the VCR.
  • Page 10: Recording Features

    – Recording – Recording Features Specifying recording length — Instant Timer Recording (ITR) During recording, press REC ( ) on the VCR repeatedly until the recording length you want appears on the display panel. The record indicator ( ) on the display panel starts blinking. ●...
  • Page 11: To Use The Vcr While It Is In Timer Recording Standby Mode

    – Timer Recording – To use the VCR while it is in timer recording standby mode Press TIMER, then press POWER. After you use the VCR, press TIMER again to put the VCR into timer recording standby mode. Checking, canceling or changing program settings Disengage timer Press TIMER, then press POWER.
  • Page 12: Other Functions

    Other Functions Checking tape position When you change the VCR operation mode from the stop mode to fast forward or rewind mode, or when you perform an Index Search or Instant Review, the tape position indicator appears. The position of “ ”...
  • Page 13: Child Lock

    – Other Functions – 2ND AUDIO RECORD — ON/OFF ● When this function is set to “ON”; If a SAP program is received, the SAP audio is recorded on both the normal and Hi-Fi tracks. The main audio is not recorded. If a non-SAP program is received, the main audio is recorded on both the Hi-Fi and normal tracks.
  • Page 14: Specifications

    Specifications GENERAL Power requirement : AC 120 V Power consumption Power on : 13 W Power off : 1.5 W Temperature Operating : 5°C to 40°C (41°F to 104°F) Storage : –20°C to 60°C (–4°F to 140°F) Operating position : Horizontal only Dimensions (W x H x D) : 435 mm x 94 mm x 247 mm (17-1/4"...
  • Page 15: For Servicing (Only In U.s.a.)

    Sophisticated electronic products may require occasional service. Just as quality is a keyword in the engineering and production of the wide array of JVC products, service is the key to maintaining the high level performance for which JVC is world famous. The JVC service and engineering organization stands behind our products.
  • Page 16: Warranty (Only In U.s.a.)

    WHAT WE WILL DO: If this product is found to be defective, JVC will repair or replace defective parts at no charge to the original owner. Such repair and replacement services shall be rendered by JVC during normal business hours at JVC authorized service centers. Parts used for replacement are warranted only for the remainder of the Warranty Period.

This manual is also suitable for:

Hr-j695ea

Table of Contents