Finishing; Facing Material - Outdoor Lifestyles ODVILLAG-36T Installation Manual

6

Finishing

A. Facing Material
• Metal front faces may be covered with non-combustible
materials only.
• Facing and/or finishing materials must not interfere with
air flow through louvers, operation of louvers or doors,
or access for service.
• Facing and/or finishing materials must never overhang
into the appliance opening.
• Observe all clearances when applying combustible
materials.
• Seal joints between the finished wall and appliance top
and sides using a 300º F minimum sealant. Refer to
Figure 10.1.
WARNING! Risk of Fire!
terials beyond the minimum clearances. Comply with all
minimum clearances to combustibles as specified in this
manual. Overlapping materials could ignite and will inter-
fere with proper operation of doors and louvers.
Finish wall material may be
combustible - Top and Sides
12 in. noncombustible
material (required)
0 in.
High Temperature Sealant (300° F/149° C min.)
Top and Side Seal Joint
Figure 6.1 Non-combustible Facing Diagram
Outdoor Lifestyles • Villa Gas Owners/Installation Manual • 4072-170 • Rev C • 04/01/14
DO NOT apply combustible ma-
0 in.
0 in.
15