Step 3 Release the 2 claws in the direction of arrow (1), and
then push the pulley pin in the direction of arrow (2).
10.16.2. Disassembly of the Loading Motor
P.C.B.
Step 1 Remove 2 screws.
Step 2 Remove Loading Motor P.C.B.
10.16.3. Disassembly of the Drive Gear (A)
& (B)
Step 1 Release the claw in the direction of arrow (1), and then
push drive gear shaft up.
Step 2 Remove Drive Gear (A) and Drive Gear (B).
10.16.4. Disassembly of Fixed Plate,
Magnet and Clamper
Release 3 claws in the direction of arrow.
10.16.5. Disassembly of Cam Gear &
Support Piece
Step 1 Rotate (A) in cam gear anti-clockwise.
43
SA-HT640WP / SA-HT640WPC