Panasonic SA-HT640WP Service Manual page 29

Item
Mode Name
Micro-processor firmware version
Micro-processor
firmware version display & EEPROM checksum display.
display &
EEPROM
checksum
display.
Initialization Initialization
User settings are cancelled and player
is initialized to factory setting.
Region display
Region display & mode
DVD (HDMI) module
DVD (HDMI)
firmware version is displayed on the
module
FL Display.
firmware
version display
Communication Displays frequency of communication
error display errors between system control IC and
mechanism control IC during DVD
module.
DVD Module To reset DVD Module. (After
Reset initialisation) Refer to Section 9.5.3 for
more information.
Description
FL Display
Panel
controller
jumper
information
N: NTSC / 6: PAL60
N: noPAL / P: PAL
Region No.
System
controller
version
Destination
System controller
generation
Region
29
SA-HT640WP / SA-HT640WPC
Key Operation
Front Key
In STOP (no disc)
mode, press STOP button
on the player, and "7"
button on the remote
control unit.
Cancelled automatically
5 seconds later.
Press "FL Display" button on
remote control unit for next
page. (FL Display)
In STOP (no disc)
mode, press STOP button
on the player , and 10
button on the remote
control unit.
In STOP (no disc)
mode, press STOP button
on the player, and "6"
button on the remote
control unit.
Cancelled automatically
5 seconds later.
In STOP (no disc)
mode, press STOP button
on the player, and "8"
button on the remote
control unit.
Cancelled automatically
5 seconds later.
In STOP (no disc)
mode, press STOP button
on the player, and "MENU"
button on the remote
control unit.
Cancelled automatically
5 seconds later.
While in initialization
mode, press & hold STOP
button on player follow by
"ENTER" button on remote
control unit.
Cancelled automatically
5 seconds later.