Monarch 9855 Application Notes page 22

To change the setting, from the Main Menu, select Setup, then Supply.
Then follow these steps.
1. Press ! or " until you see
SUPPLY
! Error Action
Press Enter/Pause. The current setting is displayed, for example:
2.
ERROR ACTION
! Ostrk/Cont 1x
3. Press ! or " see the other options. After you display the option you
want, press Enter/Pause.
4. Press Escape/Clear until you see the Main Menu.
Note: Depending on the selected Error Action, you may or may not see
a label with the overstrike pattern.
3-4 HF Application Notes
"