Other Problems - JVC HR-IP820U Instructions Manual

HR-IP820U-EN-2 97.5.20 5:33 PM
Timer-Recording Problems?
Symptoms
Timer recording is not possible.
Cable channels are not automatically switched
during timer-recording.
Timer recording takes place, but the channel is
always wrong.
We moved, and now VCR Plus+ doesn't work
properly.
"PROGRAM FULL" is displayed on the VCR
Plus+ input screen.
Timer programming screen does not function
properly.
"TIMER" and "]" on the display panel
continue blinking.
The cassette is automatically ejected.
"TIMER" and "]" continue blinking.
"TIMER" blinks for 10 seconds and the timer
mode is cancelled.
The cassette is ejected, power is shut off and
"TIMER" and "]" are blinking.

Other Problems?

Symptoms
Some channels are skipped over when
scanning channels.
Channel cannot be changed.
Snowy picture on screen when viewing TV
programs while recording another program.
Remote control does not operate my TV.
"12:00 AM" is blinking.
ATTENTION:
This recorder contains microcomputers. External electronic noise or interference could cause malfunctioning. In such cases, switch the power off
and unplug the power cord. Then plug it in again and switch power on. Take out the cassette. After checking the cassette, operate the unit as usual.
Page 37
Have you set the clock correctly and programmed the timer correctly?
— Check once again.
Have you set-up the VCR? Make sure you have...
— Set the VCR's tuner.
— Made necessary changes in the Guide Channel Set screen.
Is the TIMER indicator displayed on the display panel?
— If not, press the TIMER button to display the TIMER indicator.
Make sure that...
— The Cable Box Controller is connected to your VCR's CABLE BOX Connector (
— The correct Cable Box output channel selected in the CABLE BOX OUTPUT menu (
— The Cable Box's power is left ON during timer-recording.
Although the provided Cable Box Controller is compatible with many different cable box
brands, it is possible that it will not work with your cable box.
Is CABLE BOX OUTPUT menu set to "ON" even though you don't use an external Cable Box?
— If you don't use a Cable Box, set CABLE BOX OUTPUT menu to "OFF". (
TV stations differ by locale. It may be necessary to re-set the VCR.(
The VCR's timer memory if full; all 8 programs are used.
— Cancel any unnecessary programs in the timer memory (
Is the ITR indicator displayed on the display panel?
— Timer programming is not possible while an ITR is in progress.
There is no cassette in the VCR.
— Insert a cassette with the safety tab intact.
The inserted cassette has its safety tab removed.
— Insert a cassette with its safety tab intact. Or cover the safety tab hole of the cassette with
— adhesive tape and re-insert it (
There are no preset programs in memory, or they have all been incorrectly preset.
— Check the programmed data and re-program it as necessary. Press TIMER again.
This means that the end of the tape was reached while timer-recording was in progress.
Therefore, the preset program may not be recorded in its entirety.
Those channels are preset to be skipped over. If you need them, restore them. (
Is recording in progress?
— Press the PAUSE button, change the channel, and press the PLAY button.
Is the VIDEO indicator lit?
— Press the TV/VIDEO button.
Although the provided remote control unit is compatible with JVC televisions as well as
many TV models manufactured by others, it is possible that the provided remote control will
not operate your TV, or in some instances, will have limited function capability. (
Is the remote control's VCR switch set to the left and the TV/CABLE switch set to "TV" ?
— If not, set the VCR switch to the left and the TV/CABLE switch to "TV".
This means the clock must be set. It's displayed when time-keeping is terminated due to a
power failure or because the VCR's power plug was pulled from the AC outlet.
To set the clock. p. 9. If power was interrupted, it's also likely that all preset timer
programming data has been erased. Please check and re-program as necessary.
Check points
p. 15).
p. 30).
p. 24).
Check points
p. 12).
p. 13).
p. 13).
p. 11)
p. 31)
37