To Record Sap Programs - JVC HR-IP820U Instructions Manual

HR-IP820U-EN-2 97.5.20 5:32 PM
+
–
dB –20 15 10 8 6 4 2 0 2
L
I T R TIMER
AM
SP
VIDEO
PM
M EP
Page 25
ST(ereo) indicator
4 6 +8 dB –20 15 10 8 6 4 2 0 2 4 6 +8
R
ST R E C
SAP
PLAY
H M S PAUSE
SAP indicator
1 2 3
4 5 6
8 9
7
0
SELECT
MENU
SET
Stereo and SAP
(Second Audio Program)
Your VCR is equipped with an MTS decoder for reception of
Multichannel TV Sound broadcasts.
When a stereo program is being received, the ST indicator lights.
When an SAP program (such as a bilingual broadcast) is being
received, the SAP indicator lights.
When a stereo program is accompanied by SAP audio, both
indicators light.
To record stereo programs
Stereo programs are automatically recorded in stereo on the Hi-Fi
audio track. No special operation is required. Simply follow the
basic recording procedure.
To listen to the stereo soundtrack while recording, set the on-
screen AUDIO MONITOR to "HI-FI".

To record SAP programs

1
Press MENU, SET, and
SELECT as many times as
necessary to access the 2ND
AUDIO screen. ( p. 7).
2
Press SET to choose "ON".
3
Press MENU as many times as
necessary to exit.
Then follow the basic recording procedure.
If an SAP program is received, the SAP audio will be recorded
on both the Hi-Fi and the normal audio tracks. The main audio
program will not be recorded.
If a regular program (non-SAP) is received, the main audio will
be recorded on both the Hi-Fi and the normal audio tracks.
p. 18.
2ND AUDIO
ON
OFF
PRESS (SET +/–)FOR CHOICE
PRESS (MENU) TO END
25