Using Your Headset - Creative CB2460 Owner's Manual

Yoda CB2460.book Page 4 Tuesday, April 19, 2005 5:37 PM

Using Your Headset

The table below shows you how to use the button on your headset.
Usage Action
Press and hold the Multi-function button for three seconds. The LED turns
Turning on your
on under normal condition or blinks five times when the battery is almost
headset
depleted.
Turning off your Press and hold the Multi-function button until the LED blinks. Release the
headset button. The LED turns off.
Going into pairing Turn off your headset. Press and hold the Multi-function button until the LED
mode blinks rapidly.
Press the Multi-function button. You can also answer the call using your
Answering a call
mobile phone.
Press the Multi-function button for three seconds. You can also end a call
Ending a call
using your mobile phone.
Rejecting a call Press the Multi-function button for three seconds.
Transfering a call* Press the Multi-function button twice quickly.
Press the Multi-function button once and when you hear an alert tone, say
Using Voice Dial*
the voice tag.
Using Last Number
Press the Multi-function button twice quickly.
Redial*
Adjusting volume Press the Multi-function button to select low, medium, or high volume.
*Some features are available only for selected mobile phones. For more information, refer to your mobile
phone's User's Guide.
4