Table of Contents
Advertisement
Yoda CB2460.book Page 3 Tuesday, April 19, 2005 5:37 PM
3
3
Make a call
Before making a call, make sure that your headset is paired with your mobile phone. For
pairing instructions, see "Pair your headset and mobile phone" on page 2.
1.
Turn on your headset by pressing and holding the Multi-function button for three
seconds. The LED turns on.
2.
Dial a number using your mobile phone.
3.
When connected, talk using your headset's microphone.
4.
To end the call, press the Multi-function for three seconds. You can also end a call
using your mobile phone.
For more usage information, see section "Using Your Headset".
• When no calls are in progress and your mobile phone is turned on, your headset
goes into standby mode.
• When using your headset with your mobile phone, make sure that it is within 10
meters (30 feet) of your mobile phone.
• When the battery is almost depleted, your headset buzzes twice every 20 seconds,
and the alert tone sounds in the earpiece every 20 seconds. Recharge the battery at
the earliest opportunity.
3
Advertisement
Table of Contents
