Edit From A Camcorder - JVC HR-DVS3EK Instructions Manual

48
Edit From A
Camcorder
1
2
1
4
7
1
2
2 3
5 6
3
8 9
4
4
0
3
You can use a camcorder as the source player and your
recorder as the recording deck.
You can perform digital dubbing if you connect a device
such as a camcorder which has a DV IN/OUT connector.
Because the signals are digital, there is no loss of video or
audio quality as a result of editing.
A
Make connections.
A If the camcorder has no S-VIDEO output connector ...
... connect the camcorder's AUDIO OUT and VIDEO
OUT connectors to the recorder's front panel AUDIO
and VIDEO input connectors.
B If the camcorder has an S-VIDEO output connector ...
... connect the camcorder's AUDIO OUT and
S-VIDEO OUT connectors to the recorder's front panel
AUDIO and S-VIDEO input connectors.
C If the camcorder has a DV IN/OUT connector ...
... connect the camcorder's DV IN/OUT connector to
the recorder's DV IN/OUT connector.
When using a monaural camcorder, connect its AUDIO OUT
connector to the AUDIO L input connector on your recorder.
When a Master Edit Control-equipped JVC camcorder is used,
the camcorder is capable of controlling the recorder. Refer to
the camcorder's instruction manual for operating procedure.
B
Select the recording deck.
Press VHS or DV.
C
Set the recorder's input mode.
Press AUX (number key "0") and/or PR to select "F-1".
When using the VHS deck as the recording deck, set "VHS F-1
INPUT" to "VIDEO" for the AUDIO/VIDEO input connectors,
or "S-VIDEO" for the AUDIO/S-VIDEO input connectors,
depending on the connectors being used (
D
Set the edit mode. (VHS deck only)
See "PICTURE CONTROL" on page 68.
E
Start the camcorder.
Engage the Play mode of the camcorder.
F
Start the recorder.
Engage the Record mode of the recorder.
EDITING (cont.)
pg. 53).