Editing; Edit From A Camcorder - JVC HR-J770UE Instructions Manual

EDITING

Edit From A
Camcorder
VIDEO AUDIO
input input
AUDIO OUT
Camcorder
VIDEO OUT
Player
Your recorder
Audio/Video
cable
(not provided)
You can use a camcorder as the source player and your
recorder as the recorder.
A
Make connections.
Connect the camcorder's AUDIO/VIDEO OUT
connectors to the recorder's front panel AUDIO/VIDEO
input connectors.
● When using a monaural camcorder, connect its AUDIO OUT
connector to the AUDIO L input connector on your recorder.
B
Set the recorder's input mode.
Press AUX (NUMBER key "0") and/or PR to select "F-1".
C
Set the edit mode.
See "PICTURE CONTROL" on page 37.
D
Start the camcorder.
Engage the Play mode of the camcorder.
E
Start the recorder.
Engage the Record mode of the recorder.
NOTES:
● All necessary cables can be obtained from your dealer.
● When you select "EDIT" to dub tapes in step 3, be sure to
select "AUTO" (or "NORM" when "B.E.S.T." is set to "OFF")
after you finish dubbing the tapes.
31
EN