Table of Contents
Advertisement
Carefully lift the treadmill at the rear roller area, grasping the two side end caps, and roll the
treadmill away.
BELT TRACKING ADJUSTMEANT
If during use you notice that walking belt either shifts to the right or the left of center, first
remove "Safety Key" and unplug equipment from AC power source. Using M6 Allen wrench
provided, turn left rear roller adjustment as indicated below clockwise no more the 1/4" of a turn.
Remove M6 Allen wrench, insert "Safety Key" and insert AC power cord into AC outlet. Turn
on your treadmill and observe after running a few minutes to see if problem has been corrected.
This may take several adjustments, so repeat the above procedure.
TREADMILL TRANSPORT
9
TRANSPORT
ADJUSTMEANT
AND
Advertisement
Table of Contents
