6. CYLINDER HEAD/VALVES
CYLINDER HEAD INSTALLATION
Install the dowel pins and a new cylinder
head gasket.
Install the cam chain guide.
• Clean the intake valve rocker arm
shaft
off
installation.
Install the cylinder head.
Install the camshaft.
Install the intake valve rocker arm and the
rocker arm shafts.
CAMSHAFT INSTALLATION
Install the set plate to prevent the rocker arm
shaft from pull out.
Torque: 1.2 kgf-m (8.9 N-m)
6-9
any
grease
before
Gasket
Cam chain guide
Nut
Bolts
Bolt
People GT 200i
Dowel Pins
Cylinder Head
Fix plate