KYMCO People GT 200i Service Manual page 53

5. ENGINE REMOVAL/INSTALLATION
Remove the muffler.
Remove the rear fork mounting bolts (1)
attaching to the crankcase.
Torque: 3.5 kgf-m (35 N-m)
Remove the rear axle nut (2).
Torque: 12.0 kgf-m (120 N-m)
Remove two bolts (3) attaching to rear brake
hose clamps.
Torque: 3.2 kgf-m (32 N-m)
Disconnect the Regulator/Rectifier connector
(5).
Disconnect the ignition pulse generator
connector.
Release the rubber cap and remove the
terminal screw (6) to disconnect the start
motor cable from the start motor.
Remove the bolt and engine ground cable.
5-3
(1)
People GT 200i
(3)
(2)
(5)
(6)