KYMCO People GT 200i Service Manual page 60

6. CYLINDER HEAD/VALVES
People GT 200i
Cylinder Head Cover
CYLINDER HEAD COVER REMOVAL
Remove the met-in box.
Remove the body cover and center cover.
Disconnect the breather hose to air cleaner.
Remove the cylinder head cover four bolts.
Remove the cylinder head cover.
Bolts
CAMSHAFT REMOVAL
Thermostat Injector
Remove the injector and inlet pipe.
Remove two screws attaching the thermostat.
Inlet pipe
Turn the cam chain tensioner screw
Cam Chain Tensioner
clockwise to tighten it.
Torque: 1.0 kgf-m (9.8 N-m)
6-4