Fuel Pump - KYMCO People GT 200i Service Manual

19. LIGHTS/METERS/SWITCHES

FUEL PUMP

REMOVAL
Remove the seat and met-in
Remove the center cover
Remove the fuel pump connector
Be sure to relieve the fuel pressure before
removing fuel pump or fuel hose.
Remove the six nuts and fuel unit connectors
then remove the fuel hose.
Check the fuel pump O-ring.
If was damage, replace a new one.
INSPECTION
Connect the fuel unit wire connectors and
turn the ignition switch "ON".
Before performing the following test,
operate the turn signals to determine that
the battery circuit is normal.
People GT 200i
Connector
Fuel Hose
19-8