Steering Handlebar - KYMCO People GT 200i Service Manual

14. STEERING HANDLEBAR/FRONT WHEEL/FRONT
BRAKE/FRONT SHOCK ABSORBER/FRONT FORK

STEERING HANDLEBAR

REMOVAL
Remove the handlebar front and rear covers.
( 2-3)
Remove the front and rear brake master
cylinder attaching bolts.
Remove the four screws attaching the right
and left handlebar switches.
Disconnect the throttle cable from the throttle
grip and remove the throttle grip from the
handlebar.
Remove the handlebar lock nut, then take out
the bolt and collar.
Remove the handlebar.
INSTALLATION
Install the handlebar onto the steering stem
and install the handlebar collar, lock nut and
bolt.
Tighten the handle post bolt to the specified
torque.
Torque: 45 N-m
Brake Master Cylinders
Bolts
Screws
Lock Nut
Bolt
Collar
People GT 200i
Throttle Cable
Throttle Grip
14-4