KYMCO People GT 200i Service Manual page 155

13. FUEL INJECTION SYSTEM
. FI DIAGNOSTIC TOOL
This tool is developed by KYMCO and for KYMCO vehicle only.
Please refer to the specification when serving this vehicle.
This tool is without battery inside. The power is provided from vehicle.
This software can be updated with computer for new model through the
USB cable. The power required of tool is connected with 12V battery.
For connection, please connect this tool with the connector of ECU. It's
available when turning on the ignition switch.
The side stand must be upward when serving the diagnostic procedure.
The function includes ECU version, model name, data analysis and reset.
- ECU version: includes model name, ECU number, identifications
number and software version.
- Failure codes: DTC reading, DTC clearing and troubleshooting.
- Data analysis: For ECU's software inspection.
Reset: For the setting function adjustment.
-
People GT 200i
13-28