Setting Clock Manually - JVC HM-DT100U Instructions Manual

VCR CABLE
TV
/DBS
H
NOTE:
When you set "TIME ZONE" and "D.S.T" manually, they are
used as the setting for EPG (
C - G
A
page 51).

Setting clock manually

— Manual Clock Set
First follow steps A to B on page 15, then go to the
following steps.
C
Access Manual Clock Set screen
Press [FG] to move the arrow to "MANUAL
CLOCK SET", then press [OK].
D
Set time
Press [D E] until the
desired time appears,
then press [G].
•
Holding [D E]
changes the time in
30-minute intervals.
E
Set date
Press [D E] until the desired date appears, then
press [G].
•
Holding [D E] changes the date in 15-day
intervals.
F
Set year
Press [D E] until the desired year appears.
G
Select D.S.T. mode
Press [FG] to move the highlight bar to "D.S.T.",
then press [D E] to select "ON" or "OFF".
"ON"– Adjustment will be made by the built-in
clock itself.
"OFF"– Select when Daylight Saving Time does
not apply to you.
H
Select time zone
Press [FG] to move the arrow to "TIME ZONE",
press [D E] repeatedly until the desired time zone
is selected.
Each time you press the button, the time zone
changes as follows:
U "ATLANTIC" U "EASTERN" U "CENTRAL"
U "MOUNTAIN" U "PACIFIC" U "ALASKA"
U "HAWAII" U (back to the beginning)
I
Start clock
Press [MENU] and normal screen appears.
To make corrections any time during the process
Press [FG] to select the item you want to change, then
press [D E].
17
EN
FUNCTION SET UP TUNER SET UP INITIAL SET UP
MANUAL CLOCK SET
TIME
--:--
1/1 (THU)
DATE
YEAR 2004
D.S.T OFF
TIME ZONE
ATLANTIC
OK
MENU
SELECT WITH ARROW KEYS
THEN PRESS [OK]
SELECT
EXIT